Applications
CFEC is built for water that is hard to treat and has to be treated without interruption. That points to a specific set of industries and problems.
Geothermal brine and lithium extraction
Geothermal brine is hot, saline, and loaded with dissolved silica and dissolved metals that foul downstream equipment. Silica removal is a gating step for both geothermal energy and lithium extraction from brine, including projects in the Salton Sea region. CFEC targets silica and dissolved metals continuously, which fits a process that runs around the clock.
Semiconductor manufacturing wastewater
Semiconductor fabs produce wastewater high in fluoride and silica that has to be pretreated before discharge or reuse. CFEC is designed to remove both, and continuous operation matters here because fabs run continuously.
Industrial and municipal wastewater
Across manufacturing, food and beverage, mining, and metal finishing, CFEC targets dissolved contaminants, heavy metals, and other contaminants as a pretreatment step. Municipal pretreatment facilities face the same need for steady, low-maintenance treatment.
Agricultural water treatment
Agricultural runoff and irrigation water carry nitrates, phosphorus, and metals that CFEC can help remove.
Acid Mine Drainage and Mine Water Remediation
Abandoned and active mine sites produce some of the most challenging water treatment problems on record. Acid mine drainage — water that has contacted sulfide minerals in exposed rock and soil — carries heavy metals, sulfates, and acidity at concentrations that can render water bodies unusable for decades. The scale of the problem is substantial: the Berkeley Pit in Butte, Montana, a former Anaconda copper mine, holds nearly 1 trillion gallons of acidic water laden with copper, arsenic, cadmium, and zinc, and has been an EPA Superfund site since 1987. It represents the consequence of a treatment problem that has never had a satisfactory solution.
Electrocoagulation is effective against the contaminants found in acid mine drainage — heavy metals, dissolved metals, and suspended solids respond well to the process. The limiting factor at mine sites has always been passivation: remote locations make maintenance costly, and a reactor that stops to clean itself is not practical where downtime has environmental consequences. CFEC’s continuous self-cleaning operation addresses this directly. The reactor runs without shutdown, without acid cleaning, and without the recurring labor that has made conventional EC impractical at remote sites.
Adjacent to AMD, uranium and radionuclide removal from mine-influenced groundwater represents a growing area of federal remediation interest. Electrocoagulation has documented effectiveness for uranium removal; passivation has historically been the barrier to sustained treatment. CFEC removes that barrier.
